Thrips on Cannabis and a Combined Programme Against Both Pests: Identification, Predators, Hot-Climate Adjustments and Emergency Steps (Part 2 of 2)

Thrips are small flying insects that scrape leaves and suck out the cell contents. Together with spider mites, they are the most common sap-sucking pests of indoor cannabis. This part explains how to recognise thrips, where they hide while changing into adults, which predators reach which stage, and how to combine everything into one programme against both pests in a hot Thai room.

A short reminder from Part 1 on spider mites: the specialist predator Phytoseiulus persimilis stops working above 30 °C. The general feeders Neoseiulus californicus (working to 32 °C) and Amblyseius andersoni survive without prey and are better suited to warm rooms [5]. These limits come back in the combined programme below.

This is Part 2. Part 1: Spider Mites on Cannabis: Identification, Life Cycle, Pesticide Resistance and Predatory Mites for Hot Rooms (Part 1 of 2)

Spotting thrips

Thrips are tiny (1–2 mm) and slender. The most common species in cannabis is the western flower thrips (Frankliniella occidentalis). It is a pest of greenhouses all over the world.

What you see What it means
Silver or bronze streaks or patches on leaves Emptied cells fill with air and reflect light
Tiny black dots on leaves Thrips droppings (frass)
Small, long insects on leaves and in flower clusters Adults, 1–1.5 mm, pale yellow to brown, moving fast
Curled or misshapen new growth Heavy feeding on young tissue
Dark scars on buds Feeding damage in flower, which lowers quality and grade

Spider mites mostly walk from plant to plant. Thrips fly and jump, so they spread across a whole room in a few days. That is why a single thrips sighting should lead to a check of every plant, not only the one where you found it.

Life cycle, and where the pupae really are

Stage Where it lives
Egg Pushed inside the leaf tissue
First and second larval stage Feeding on the leaf surface
Prepupa and pupa Not feeding; location explained below
Adult Feeding and breeding on leaves and flowers

A larval stage between two moults is called an instar. So “first instar larva” means the youngest larva. In the prepupa and pupa stages the insect stops eating and changes into the winged adult.

Common advice says the prepupae and pupae sit in the growing medium, so treating the soil breaks the cycle. That is only half true, and the false half wastes money.

Two US university extension services (public advisory programmes for farmers) give a fuller picture. The University of California Statewide Integrated Pest Management Program (UC IPM) says the prepupa and pupa occur in the growing medium or soil under infested plants [2]. Kansas State University’s extension guide is more specific. Western flower thrips “pupate in leaf debris, on the plant, and in the open flowers of certain types of plants,” although both stages commonly occur in the medium or soil under benches [1][2].

The result follows directly. A biological agent applied to the soil cannot reach pupae that are on the plant. The Kansas State guide warns that agents aimed at the soil stages “may not provide sufficient control or suppression (based on percent mortality) of the soil-dwelling life stages (pupae) to significantly impact western flower thrips populations” [1]. Treat the soil as one layer among several, not as the step that ends the problem.

What to do: keep fallen leaves off the floor and out of the pots. The purpose is to remove pupae that a soil treatment would miss.

Thrips and viruses: what has been shown in cannabis

In many crops, thrips carry tospoviruses, a group of plant viruses that includes tomato spotted wilt virus (TSWV). Cannabis articles often repeat this as an established threat. For cannabis, the survey work does not support that claim so far.

A broad survey of viruses and viroids in hemp was carried out in Colorado (United States) and published in 2021. A viroid is a disease agent even smaller than a virus. The survey found 7 viruses and 1 viroid. It did not detect TSWV or any other tospovirus [4].

What it did find, at high levels, was beet curly top virus (BCTV), in 81% of symptomatic samples (109 of 134). It also found hop latent viroid and several others [4]. BCTV is spread by the beet leafhopper, not by thrips.

So control thrips because their feeding scars flowers and lowers quality and grade. Do not control them because of a cannabis virus risk that nobody has shown. If a supplier or article says otherwise, ask which cannabis study the claim comes from.

Predators for thrips

On the plant (attacking the larvae):

Predator Stage it attacks
Neoseiulus cucumeris (formerly Amblyseius cucumeris) First instar larvae only [1]
Amblyseius swirskii First and second instar larvae [1]; also whitefly eggs and young larvae. Works at 20–32 °C, not below 18 °C; does poorly below 60% relative humidity (RH) [5]
Orius species (minute pirate bug, a small predatory bug) All thrips stages, including adults. More expensive, very effective

In the growing medium (attacking prepupae and pupae):

Agent Notes
Stratiolaelaps scimitus (formerly Hypoaspis miles) A predatory mite that lives in the soil; also controls fungus gnat larvae
Steinernema feltiae A tiny worm (nematode) that infects and kills insects, applied by watering it into the medium (a drench)

Both soil agents are worth using. S. scimitus is worth it for fungus gnat control alone. But because many pupae are on the plant, do not budget for soil agents as the full answer to thrips.

A layered thrips programme:

  1. Release A. swirskii (in warm rooms) or N. cucumeris into the canopy from week 1, before thrips appear. The purpose is to catch the young larvae as soon as they hatch.
  2. Add S. scimitus to the medium at transplant, to work on pupae and fungus gnats in the pot.
  3. Drench with S. feltiae during an active infestation, to add pressure on the soil stages.
  4. Add Orius if numbers do not fall with predatory mites alone, because Orius also eats adults.
  5. Use sticky cards to monitor, not to control. Hang blue or yellow cards above the canopy [1]. Blue attracts western flower thrips best. UC IPM recommends yellow, because it also catches other pests and shows you more of what is in the room [2]. Count the catch each week to see whether numbers are rising or falling.

Translator’s note: As with predatory mites, ask a supplier in Thailand which of these thrips predators and nematodes they can supply, and how they keep them cool in transit. A. swirskii is the one listed here as working up to 32 °C, so it suits warm Thai rooms best on paper.

Other ways to control thrips

Spinosad is made from a natural product of the soil bacterium Saccharopolyspora spinosa. It is approved for organic use and works very well against thrips. But it is already losing effect. Resistance was reported in western flower thrips in greenhouses in south-eastern Spain [3]. The Kansas State guide also reports populations with reduced sensitivity or resistance to spinosad in Florida and Australia [1].

So rotate between modes of action. A mode of action is the way a product kills the pest, and switching groups slows resistance. Do not build a programme on spinosad alone. Spinosad is toxic to bees, so do not use it outdoors while plants nearby are being pollinated.

Neem oil works on thrips larvae if you cover all leaf surfaces well. The same limits apply as for spider mites: stop after about week 3 of flowering because of the effect on taste.

Translator’s note: In Thailand, only use spinosad, neem or any other pest control product that is registered with the Department of Agriculture (กรมวิชาการเกษตร), and use it exactly as the label says. If you are working towards GACP certification, check with your auditor before you spray. See What You May Legally Spray on Cannabis Under Thai GACP.

Room hygiene and barriers:

  • Remove and destroy badly infested leaves, so the eggs inside them do not hatch in the room.
  • Keep the floor clean, because pupae shelter in debris.
  • Cover air intakes with 145-micron (0.145 mm) screen. This is the mesh size UC IPM gives to keep thrips out [2].
  • Do not wear blue or yellow clothes into the grow room. Thrips are drawn to these colours, which is why sticky cards use them, and they can ride in on you.

Resistance in plain terms: UC IPM’s advice for this species is that “insecticide resistance is a major problem with western flower thrips, so rotate applications among modes of action of known effective insecticides and do not rely on insecticides alone” [2].

The combined programme for both pests

This table puts spider mite and thrips control into one programme, layer by layer. It follows integrated pest management (IPM).

Layer What to do When
Prevention Keep new clones apart for 7 days before they enter the room. Screen vents at 145 µm. Clean between cycles. Always
Monitoring Check leaf undersides with a hand lens. Hang blue or yellow sticky cards. Weekly
Biological baseline N. californicus or A. andersoni (spider mites) + A. swirskii or N. cucumeris (thrips) + S. scimitus (medium) At transplant
Early response Spot-spray neem or insecticidal soap on the affected plants At the first sign
Cure P. persimilis (spider mites, only if under 30 °C) or Orius (thrips); spinosad in rotation When numbers pass your action level
Last resort A targeted chemical spray, rotated by mode of action Only if biological control fails

The 7-day separation for new clones gives hidden pests time to show up before they reach the main room. Translator’s note: Clones bought from another farm are a common way to bring in mites, thrips and diseases such as hop latent viroid. Keep them apart for the full 7 days and check them with a hand lens before they join the room.

Running the programme in a tropical climate

Almost every predator recommendation and release rate in circulation comes from greenhouses in temperate countries. Three adjustments matter in Thailand and the rest of Southeast Asia.

Check canopy temperature before you order predators. P. persimilis does not work above 30 °C, and A. swirskii does not work below 18 °C [5]. In a Thai indoor room, the upper limit is almost always the one that matters. That rules out the best spider mite specialist and points you towards N. californicus (to 32 °C) and A. andersoni.

High humidity helps and hurts. It slows spider mites and suits every predator in this article, since all are listed as doing poorly below 60–70% RH [5]. But it also raises the risk of Botrytis (grey mould) and powdery mildew in late flowering. Use humidity against spider mites in the vegetative stage. In flowering, disease risk usually matters more.

Predators are living and perishable, and most are imported. Shipping time and an unbroken cold chain decide whether a sachet arrives alive. Plan a preventive release you can schedule ahead. An emergency order has to survive a hot courier trip.

Translator’s note: Thai rooms face two extra risks. A power cut stops the air conditioner, and canopy temperature can climb past 30 °C within hours, which favours spider mites and pushes P. persimilis out of its range. In the rainy season, very humid outside air raises the disease risk in flowering. Keep a daily log of the highest temperature and the lowest and highest humidity at canopy height. The purpose is to know which predators your room can actually support, and when disease risk is climbing.

Emergency response

Spider mites, with webbing already visible:

  1. Move the affected plants away from the others, so mites do not spread further.
  2. Remove and destroy the most heavily webbed parts. Bag and seal them before they leave the room.
  3. Spray the remaining leaves with a strong water jet, top and underside.
  4. Spray neem plus soap at lights-off.
  5. Order P. persimilis only if the room can be held under 30 °C and above 70% RH. Otherwise stay with the general-feeding predators and the spray programme.
  6. Repeat the water spray and neem every 3 days for 2 weeks, to hit each new hatch.

Thrips, with heavy silver damage:

  1. Remove the worst-damaged leaves.
  2. Spray spinosad on the leaves, then switch to a different mode of action for the next round.
  3. Drench S. feltiae into the medium, knowing it reaches only part of the pupae.
  4. Hang sticky cards to catch flying adults and to measure whether numbers are really falling.
  5. Release Orius if you can get it.
  6. Repeat after 5–7 days, to catch the next generation hatching from eggs inside the leaves.

Which of these pests have you dealt with, and did predators work in your room or did you have to move to sprays? Post your results, room temperatures and questions below this topic so other growers can learn from them.

References

  1. Cloyd, R.A. (2010). Western Flower Thrips Management on Greenhouse-Grown Crops. Kansas State University Research and Extension, MF-2922.
  2. University of California Statewide IPM Program. Thrips — Floriculture and Ornamental Nurseries, UC Pest Management Guidelines.
  3. Bielza, P., et al. (2007). Resistance to spinosad in the western flower thrips, Frankliniella occidentalis (Pergande), in greenhouses of south-eastern Spain. Pest Management Science. doi:10.1002/ps.1388
  4. Chiginsky, J., et al. (2021). First insights into the virus and viroid communities in hemp (Cannabis sativa). Frontiers in Agronomy, 3, 778433.
  5. Koppert Biological Systems. Technical product information for Phytoseiulus persimilis, Neoseiulus californicus, Amblyseius swirskii and Amblyseius andersoni (supplier data).

This article is part of the Asiannabis Community educational series on pest and disease management. Content is for educational purposes within jurisdictions where cannabis cultivation is legally permitted.