This article is for licensed farms and larger home growers deciding how to divide their growing space. It covers one layout choice: remove the rooms that hold mother plants, young plants and growing plants, and use every room for flowering. The original post lists the benefits. Translator’s notes add what the original leaves out: where the young plants come from instead, and how this works in Thailand and Southeast Asia.
1. The idea in short
On a cannabis farm, profit depends on how much of your floor space is producing flowers at any one time. Many farms divide their space into four kinds of room.
- Mother room: holds mother plants. These are plants kept only to supply cuttings, never to flower.
- Nursery: holds rooted cuttings (clones) or seedlings while they establish roots.
- Vegetative room: grows young plants under long light hours until they are big enough to flower. You can read more about the vegetative stage on the forum.
- Flowering room: the only room that produces a harvest.
The original post suggests removing the mother room, the nursery and the vegetative room. All of that space then becomes flowering rooms. According to the original, this cuts running costs and gives you the biggest possible flower harvest.
Do this: write down the floor area in square metres of each room type on your farm. This shows you how much flowering space you could gain before you change anything.
2. What you gain
2.1 More flowering space, more plants per cycle
Without mother and nursery rooms, all of your space can hold flowering plants. That means more plants in each cycle. Floor space that used to hold mother plants and seedlings now holds flowering canopy. Canopy means the layer of leaves and buds that sits directly under the lights. With more canopy in flower each cycle, you harvest more each cycle.
Translator’s note: you only get this gain if young plants spend little or no time in the flowering rooms. Say you root cuttings or grow seedlings in a flowering room under long light hours. For those weeks, that room is not flowering. The non-flowering time has moved to a different room, but it has not gone away. Section 3 shows the ways farms deal with this.
Do this: for each flowering room, count how many weeks of the last year it actually spent flowering. You need this number to check whether removing the other rooms will really add flowering weeks.
2.2 Lower running costs
- Electricity: mother rooms need light for 18–24 hours a day. Removing them saves a large amount of energy.
- Labour: you don’t need staff to care for mother plants or take cuttings. Taking cuttings, or cloning, means cutting a branch and rooting it to make an exact copy of the plant.
- Fertiliser: you no longer spend money feeding mother plants and seedlings.
Translator’s note: in Thailand, outside temperatures of 30–35 °C are normal. A mother room therefore needs air conditioning as well as lights for most of the day. The power saving covers cooling as well as lighting. However, if you buy young plants, part of the saving goes into the price you pay the supplier.
Do this: for one month, record the electricity, staff hours and fertiliser used by your mother and nursery rooms. If the rooms share a meter, fit a separate meter on the room circuit. You then have a real baht figure to compare with what bought plants would cost.
2.3 Lower pest and disease risk
Mother rooms are often where pests and fungi multiply. The common ones are spider mites, broad mites, aphids and fungal diseases. Mother plants stay in the room for a long time, which gives a pest time to build up. Every cutting taken from an infested mother then carries the pest onward.
Removing the mother room lowers the risk of pests and diseases spreading into the flowering rooms. Farm hygiene improves overall. As a result, you need fewer pesticides and other chemicals.
Translator’s note: this benefit only holds if new plants arrive clean. Clones bought from another farm in Thailand can carry mites. They can also carry HLVd (hop latent viroid). HLVd is a tiny infectious agent that often shows no signs in young plants but can stunt plants and reduce the harvest. Bought clones can also turn out to be a different strain from the one you ordered.
Translator’s note: without a mother room, a pest on a bought plant goes straight into a flowering room. When you have to spray, use only products registered with the Department of Agriculture (กรมวิชาการเกษตร), exactly as the label says. See what you may legally spray for details.
Do this: set up a small, separate quarantine area and keep every new batch there for a few days. Check the undersides of the leaves with a hand lens before the plants go into a flowering room. This lets you catch pests before they reach your crop. Our guide to integrated pest management explains how to plan these checks.
3. Where young plants come from without a mother room
Translator’s note: the original post does not explain this. Everything in sections 3, 4 and 5 was added by the translator. Without a mother room you still need young plants for each cycle. Farms use four main options.
Option 1: buy rooted clones from another farm. You need no mother room and no nursery. The risks are the ones in section 2.3: pests, HLVd and the wrong strain. A further risk is supply. If your supplier is late or runs out, your flowering room sits empty and earns nothing. Before you buy or sell live plants, ask the Department of Thai Traditional and Alternative Medicine (DTAM) whether your licence covers this and what records each farm must keep.
Option 2: start from seed. Seed needs no mother plant. However, plants from the same packet can differ in height, flowering time and quality. This variation is explained in phenotype hunting. Photoperiod seedlings still need weeks under long light hours, so the vegetative stage just moves into the flowering room. Autoflowers start flowering on their own whatever the light hours, so they can grow in a flowering room from the start. The seed types guide compares regular, feminised and autoflower seed. Before buying, read what is legal when buying seeds in Thailand.
Option 3: tissue-culture plantlets from a laboratory. Section 4 compares this with keeping mothers.
Option 4: a mixed setup. Some farms keep a few mothers in a small tent and give young plants a short vegetative period inside the flowering room. Using many small plants with a short vegetative stage, as in the sea of green method, keeps that period short. The two-room perpetual harvest schedule shows how to work out the timing.
Do this: write down where the plants for your next three batches will come from, and name a backup source for each. This keeps a flowering room from sitting empty while you wait for plants.
4. Tissue-culture plantlets compared with keeping mother plants
Translator’s note: tissue culture is a laboratory method. A small piece of plant tissue grows into many small plants (plantlets) inside sterile containers on a nutrient gel. The laboratory, not your farm, holds the source plants. The plantlets arrive from a very humid, sealed container. They need gradual adjustment to room air before they can go under strong light.
| Keeping mother plants | Tissue-culture plantlets | |
|---|---|---|
| Space and power | One room lit 18–24 hours a day, plus cooling | No source plants on your farm |
| Labour | Caring for mothers and taking cuttings | Adjusting plantlets to room air after delivery |
| Pests and viroids | Can build up over time and pass to every cutting | Can start from tested clean stock, if the lab tests and shows you the results |
| Control of timing | You take cuttings when you need them | Depends on the lab’s schedule and lead time |
| Your genetics | Kept on your farm | The lab must hold your strain; ask how they keep each strain labelled and separate |
| Cost | Electricity, staff, fertiliser | Price per plantlet; ask the lab for a written quote |
What you gain: no mother room, and a chance to start each cycle from clean stock.
How it works in Thailand and Southeast Asia: We could not confirm a laboratory in Thailand that sells cannabis tissue-culture plantlets to licensed farms. Before you plan around one, ask any supplier for its licence and its lead time. If no supplier is available, keep a small mother tent instead. Run it with strict hygiene, and have the mothers tested for HLVd. We could not confirm a laboratory in Thailand that tests cannabis for HLVd, so ask any lab you use whether it offers this test.
Where to start: order one small batch of plantlets and grow it next to a batch from your usual source. Ask the laboratory for HLVd test results and proof of the strain before you pay. That way you learn whether the plantlets root, adjust and flower as well as your usual plants.
5. Thai conditions: heat, power cuts and the rainy season
Translator’s note: three local conditions change the decision.
- Heat: at 30–35 °C, a mother room needs air conditioning most of the day. Removing it saves more power in Thailand than in a cool climate.
- Power cuts: if the air conditioning stops on a hot day, mother plants can be badly stressed or die, and you lose the source of your genetics. Without a mother room, a power cut hits only flowering plants. But then your genetics depend on an outside supplier. In both cases, keep a backup: stored seed, or a few plants of each strain at a second site.
- Rainy season: high humidity favours fungi such as botrytis (bud rot). Plants delivered from another farm in the wet months need extra checks for mould before they enter a flowering room.
Do this: write a one-page plan that says where your genetics are kept, and where the backup is, if the power goes off for a day. This protects you from losing a strain to one breakdown.
6. Conclusion and how to test it on your farm
The original post concludes that removing mother and nursery rooms saves money and raises yield and profit. It gives no figures. Test the change on your own farm before you convert every room.
Do this: for one cycle, run one flowering room on plants from your new source and keep the rest as they are. In both, record:
- grams harvested per square metre
- days each room spent not flowering
- cost of young plants, electricity, staff hours and fertiliser
- every pest or disease found, and when
Compare the two after harvest. These numbers tell you whether the new layout really earns more under your own conditions. If you run the trial, please post your figures below this topic or keep a log in Grow Diaries. Other growers can then compare their results with yours.