Hemp plastic is a broad name for plastics that contain hemp material, such as fibre, the ground woody core (hurd) or hemp extracts, combined with a polymer. In these composites, hemp acts as a filler or reinforcement inside a plastic matrix.
How hemp goes into plastic
- As reinforcement. Bast fibres add strength. In a 2025 test, polyethylene alone reached 24.64 MPa tensile strength, while hemp-fibre composites reached 31.41–33.36 MPa.
- As a filler. Ground hurd replaces part of the polymer.
- As an additive. Extracts such as hemp essential oil can add functions to packaging films.
The matrix can be a conventional plastic or a bio-based one such as PLA (polylactic acid), made from plant sugars.
What research shows
- Hurd as a filler. A 2026 study treated hemp hurd with heat (torrefaction) at 220, 260 and 300 °C before adding 2.5–5% to PLA. Higher treatment temperatures improved how the filler mixed and bonded. The 300 °C filler gave the biggest gains in stiffness, strength, hardness and wear resistance. All composites became less stretchy.
- Essential oil in packaging. A 2026 study added hemp essential oils to PLA films at 1–10% by weight. It tested antioxidant and antibacterial effects for food packaging.
The European Commission notes that hemp-derived products are used as substitutes for plastic in sectors such as car manufacturing, rail and aerospace.
What the label does not tell you
A product called “hemp plastic” can contain only a small share of hemp. Whether it is biodegradable depends on the matrix, not on the hemp. A PLA composite behaves differently from a polypropylene one.
In Thailand and Southeast Asia
Fibre and hurd are by-products of hemp grown for seed or fibre. Selling them to composite makers can add value to a hemp crop. Such buyers usually need steady volumes and consistent quality, so talk to them before planting.
Common mistakes
- Calling every hemp composite “biodegradable”. Ask what the matrix is.
- Assuming a high hemp share. Ask for the percentage by weight.
- Ignoring moisture. Plant fibres take up water. Store fibre and hurd dry.
If you want to sell hemp fibre or hurd to a composite maker, ask for their specification for fibre length, moisture and cleanliness first.
Related terms
Hemp Hurd · Bast Fibre · Decortication · Hempcrete · Hemp Textile · Hemp · Biochar
Read more on Asiannabis
References
- Brachi P. et al. (2026). Hemp hurd torrefaction as an effective strategy to enhance PLA-based composite mechanical and tribological properties. Scientific Reports
- Mazzara E. et al. (2026). Hemp essential oils as novel antioxidant and bacteriostatic agents in PLA-based packaging. Polymers
- Różańska W., Rojewski S. (2025). Composites with flax and hemp fibers obtained using osmotic degumming, water-retting, and dew-retting processes. Materials
- European Commission, Hemp