What Is a Hanging Gutter? A Raised Channel That Carries Slab Drainage

A hanging gutter is a long growing channel suspended above the greenhouse floor. Slabs, bags or pots sit in a row on top of it, and the gutter carries their drain water to one end.

How it works

An FAO guide to greenhouse soilless culture describes slabs and bags placed in channels so the drainage can be collected. A hanging gutter does the same job, but it hangs from the greenhouse structure instead of resting on the ground.

The controlled environment agriculture centre at Ohio State University (USA) notes that steel hanging gutters are also used for strawberries. They are similar to those used for high-wire tomatoes. Containers or bags of growing medium sit on top and receive drip irrigation. It gives a typical spacing of 0.8–1.0 m between gutters, centre to centre. Raised systems also have a practical reason: workers can stand instead of bending over the plants.

Slope and drainage

The gutter needs a steady fall so drain water runs to the collection end. The right slope depends on the system. The FAO guide gives a uniform 0.5% for substrate-filled troughs, 0.2–0.3% for gravel beds and 1.2–3% for NFT channels. For NFT, it warns that dips in the channel floor leave pools of still solution that starve roots of oxygen. A gutter that sags between hangers can leave standing water under some slabs in the same way.

How it relates to open and closed systems

Open and closed systems describe what happens to drain water after it leaves the slab. A hanging gutter is the hardware that collects it. It works with run-to-waste as well as with recirculation.

Common mistakes

  • Copying a slope figure without checking your own run. Measure the fall with a level along the whole length, not only at the ends.
  • Hanging gutters from a frame not built for the load. Wet slabs and full-grown plants are heavy. Check the load with whoever built the greenhouse.
  • Ignoring the drain end. Collect the drain at the outlet and measure it, as you would with a catch tray.

After you install or move a gutter, pour a bucket of water in at the high end. Check that all of it reaches the outlet without pooling.

Related terms

run-to-waste · Open and Closed Systems · nutrient-film-technique · Catch Tray · Drip Stake · rockwool · aeration

Read more on Asiannabis

References