Welcome to Extraction & Concentrates: Solvent Methods, Lab Safety and the Thai Licence Rules

This subcategory is for extraction that uses a solvent and for making concentrates. A solvent is a liquid or gas that dissolves the cannabinoids and terpenes out of the plant. Topics here include butane and propane extraction, CO2 extraction, ethanol extraction, distillation and making isolate. For an overview of how these methods compare, start with Cannabis Extraction Explained: Solvent and Solventless Methods Compared.

Extraction without a solvent (ice water hash, dry sift, rosin) has its own subcategory, Solventless & Hash. Post those topics there.

What belongs here

  • Hydrocarbon extraction (BHO and PHO). BHO means butane hash oil and PHO means propane hash oil: concentrates made by passing liquid butane or propane through plant material. Topics include closed-loop systems (sealed equipment where the gas is recovered and never released into the room), purging (removing leftover solvent from the finished product) and safety.
  • CO2 extraction. This uses carbon dioxide under pressure. “Supercritical” means the CO2 is pushed above a set temperature and pressure so it acts partly like a gas and partly like a liquid. “Subcritical” means it is kept below that point, which is gentler and slower. Post your parameters for both here. See also CO2 Extraction of Cannabis.
  • Ethanol extraction. This includes winterization (chilling the extract in ethanol so fats and waxes freeze and can be filtered out), decarboxylation and other post-processing. Decarboxylation is the heating step that turns the acid forms of cannabinoids into the active forms; it is explained in Edibles and Decarboxylation. See also Ethanol Extraction of Cannabis.
  • Short-path and wiped-film distillation. Both separate cannabinoids by boiling them under vacuum. Short-path works in small batches; wiped-film spreads the oil in a thin layer on a heated wall and suits continuous, larger runs.
  • Isolate and crystallization. Methods for making a single, almost pure cannabinoid in crystal form.
  • Lab safety, written procedures and equipment reviews. Written procedures are often called SOPs (standard operating procedures): step-by-step instructions that every operator follows the same way each time.
  • Yield and quality control. How to get more extract from the same material, and how to check what is in it. For checking quality, see How to Read a Cannabis Certificate of Analysis.

The rules for posting here

  1. Write about safety in every method post. Say how the room is ventilated, whether the system is closed-loop, and which lab protocols you follow. This lets readers judge whether your method is safe to copy.
  2. Stay within Thai law. All posts must comply with the Notification of the Ministry of Public Health Re: Controlled Herbs (Cannabis), B.E. 2568 (2025) and the Ministerial Regulation on Cannabis or Hemp Extracts, B.E. 2569 (2026).
  3. No direct sales. Do not offer extracts or concentrates for sale in this subcategory.

Translator’s note: the legal points below explain why rule 2 matters for anyone extracting in Thailand.

  • Cannabis flower is a controlled herb under the B.E. 2568 Notification, in force since 26 June 2025. Advertising and online sale of flower are prohibited.
  • The Ministerial Regulation on Cannabis or Hemp Extracts B.E. 2569 has been in force since 26 April 2026. Extracts with more than 0.2% THC are licensed only to Thai juristic persons that are not “foreign” under the Foreign Business Act B.E. 2542, to state agencies and to the Thai Red Cross Society. A home grower or a foreign-owned company cannot get this licence.
  • Making an extract with more than 0.2% THC without this licence is not legal. How the 0.2% line works, and which law covers an extract, is explained in Controlled Herb vs Category 5 Narcotic.
  • Section 78 of the Thai Traditional Medicine Protection Act B.E. 2542 (1999) sets up to 1 year in prison and/or a fine of up to 20,000 baht for unlicensed research, export, sale or processing of a controlled herb. Which licence covers which activity is explained in Licensing and Compliance in Thailand.
  • The draft Cannabis Control Act is not law yet. The Cabinet approved the draft on 22 September 2026 and sent it to the House.

What to do: before you post a method, check that you or your company holds the right licence. If you do not, ask about the law rather than describing your own run.

Translator’s note: Thai conditions make solvent extraction more dangerous than in the cooler countries most guides come from.

  • Butane and propane are flammable gases. In a closed room at 30–35 °C, more solvent evaporates and the vapour can build up quickly. One spark from a light switch, fridge or fan motor can ignite it.
  • A power cut stops extraction fans and chillers while solvent may still be in the system. Plan what you do the moment the power goes off.
  • Open-blasting (spraying butane through a tube in the open air) is the classic cause of home explosions. It is not a safe shortcut in a kitchen, condo or grow room.

What to do: never run hydrocarbon extraction at home. Work only in a licensed facility with a closed-loop system, explosion-proof electrics and ventilation that keeps working during a power cut.

How to write a useful post here

To get useful answers, include:

  • the method and the equipment type (for example, closed-loop BHO, supercritical CO2, cold ethanol);
  • the solvent used and how it is recovered;
  • how the room is ventilated, and what happens if the power fails;
  • batch size and the yield you got;
  • your test results, if you have them;
  • whether the work is done under a licence (you do not have to name the licence holder).

This tells other members what to compare with their own setup and where your problem might be.

Equipment and where to ask

Extraction equipment and solvents are not sold in this subcategory. If you need equipment, ask an authorized distributor of that brand in Thailand. Members’ listings belong in Marketplace. Equipment experiences and reviews are welcome here.

Have a question about a method, a safety setup or the licence rules? Start a new topic in this subcategory, or reply below this post.