What Is Purging? Removing Leftover Solvent From a Cannabis Extract

Purging is the step after solvent extraction in which leftover solvent is driven out of the extract, usually with gentle heat and vacuum. Its goal is to bring residual solvents below the limit set by the buyer or regulator.

Why it is needed

Solvents such as butane, propane, ethanol or hexane dissolve cannabinoids and terpenes out of plant material. After the main recovery step, some solvent stays trapped in the thick extract. It must come out before the product is used.

The international guideline on residual solvents in medicines, ICH Q3C, starts from a simple rule. Residual solvents have no benefit, so they should be removed as far as possible. It sorts solvents into three classes:

  • Class 1: to be avoided, such as known carcinogens.
  • Class 2: to be limited. Hexane is here, with a limit of 290 ppm.
  • Class 3: low toxic potential. Ethanol and heptane are here. Up to 5,000 ppm (0.5%) is acceptable without justification.

Butane and propane are not in the ICH Q3C tables. Cannabis testing rules, such as Washington State’s, set their own residual solvent limits.

How it is done

The extract is spread thin and held under vacuum, often in a vacuum oven, with mild heat. Low pressure lets the solvent boil off at a low temperature, which protects terpenes. The time and temperature depend on the solvent and the product’s texture.

Washington State’s extraction rule says residual solvent in finished extract must not exceed its testing limits. It also requires ethanol to be recaptured, not vented into the air.

In Thailand and Southeast Asia

Extracts with more than 0.2% THC by weight are Category 5 narcotics, and producing them needs a licence. A licensed producer working toward GMP should plan a fixed purge step and a residual solvent test for every batch.

Common mistakes

  • Judging the purge by look or smell. Only a lab test measures residual solvent.
  • Turning up the heat to save time. Higher heat also drives off terpenes, which are volatile.
  • Purging near ignition sources. Hydrocarbon vapour is flammable. Ventilate and control sparks.

Set one purge procedure for each product, test the first batches for residual solvents, and change the procedure only with a new test.

Related terms

Residual Solvents · Butane Hash Oil (BHO) · Closed-Loop Extraction System · Solvent-Based Extraction · Rotary Evaporator · Shatter · Cannabis Wax

Read more on Asiannabis

References