A closed-loop extraction system is sealed equipment in which a solvent such as butane, propane or CO2 extracts the plant material and is then recovered for reuse. The solvent stays inside the system instead of escaping into the room.
Why “closed” matters
Butane and propane are heavier than air and highly flammable. If they leak into a room, a spark can ignite them. CO2 systems work at high pressure, so a weak vessel can fail. A 2026 Canadian study of burn injuries names hydrocarbon burns from butane extraction as one way cannabis adds to burn risk. A closed loop keeps the solvent inside pressure-rated vessels and lines from start to finish, and a recovery pump returns it to the tank.
What one regulator requires
Washington State’s rule for licensed extractors is a detailed example:
- Hydrocarbon solvents must be at least 99% pure and used in a professional-grade closed-loop system designed to recover them.
- CO2 systems must be closed-loop, with every vessel rated to at least 600 psi (about 41 bar), and use CO2 of at least 99% purity.
- Systems must be commercially manufactured and carry a permanent serial number.
- A licensed engineer must certify each system against standards such as ASME, ANSI, UL or ASTM.
- The local fire official must approve the equipment, the operation and the room.
- Workers must be trained on the system and have access to the safety data sheets.
- Ethanol must be recaptured, not vented into the air.
In Thailand and Southeast Asia
Extracts with more than 0.2% THC by weight are Category 5 narcotics, and only licensed producers may make them. Hot rooms raise vapour pressure in solvent tanks. Treat ventilation, gas detection and electrical safety as part of the equipment, not extras.
Common mistakes
- Building or buying uncertified equipment. A vessel without a pressure rating and certificate may not hold the gas.
- Running extraction in a normal room. Ignition sources must be controlled wherever flammable gas may collect.
- Skipping training. Every operator needs written procedures and must know the safety data sheet of the solvent.
Before any solvent extraction, check that the system has a serial number and an engineer’s certificate, and that a written procedure is on the wall.
Related terms
Solvent-Based Extraction · Butane Hash Oil (BHO) · CO2 Extraction · Purging · Residual Solvents · Safety Data Sheet (SDS) · SOP (Standard Operating Procedure)
Read more on Asiannabis
References
- Washington Administrative Code, WAC 314-55-104 Processor licensee requirements
- Paleczny S. et al. (2026). Longitudinal, population-based analysis of burn injuries across Canada pre-recreational and post-recreational cannabis legalisation. BMJ Public Health
- The Nation, New cannabis-hemp extract rules take effect, limiting use to four purposes